Blowing process in color spinning

For a long time, due to the lack of understanding and attention of various textile enterprises to the blowing process, it has become a forgotten corner, so it has brought many difficult quality problems to the later processes. In order to improve the quality of products, we must first take the first pass - clearance and combing.

        Clearing flowers is different from other processes. It is a process with many gay men and a strong collective nature. Therefore, unity, cooperation and team spirit are the characteristics of Qinghua work. How to do the cleaning work well, I think we should start with the security and mechanic. As a maintenance worker, to do a good job of cleaning, first of all, you must be proficient in cleaning equipment, color spinning-cleaning, and understand the operation and management. Only in this way can the work be done well, and a good foundation will be laid for the next few steps to stipulating high-quality products!

        As a good maintenance worker, you must be proficient in the characteristics, performance, and proportion of the raw materials spun, and adjust the process and equipment according to the raw materials. Unnecessary questions and difficulties.

It is very important to arrange the bales. All kinds of raw materials should be baled according to the proportion of cotton, and the distance between the inner and outer wall panels and the cotton bales should be too large. For the same grade of cotton bales, they should be dispersed vertically and crossed horizontally, and the inside, middle and outside are evenly distributed. Open, reasonable collocation arrangement. If the bales have uneven heights, they should be cut higher and added with seams. The tight bags should be loosened first, and the re-flowered rolls should be placed in the middle longitudinally and evenly added with seams or packaged for use. The reply slip should be torn under one foot.

The diameter of the inner wall panel of the disc: meters, the inner wall panel - the outer wall panel is: 5 meters, such as a row of 150KG cotton bales, about 30 bales can be placed. The polyester bales are arranged in a horizontal plate with nine bales. The arrangement is exactly the opposite of that of the cotton bales. Flowers are added between the bags and the inner and outer wall panels and the polyester bales are separated by a certain distance, so that the thugs will not be entangled under normal circumstances. flower. The disc is also relatively uniform during the grabbing process.

We all know that improving the operation rate of the cotton picker is the first job to ensure the quality of the cotton lap. How to improve the operation rate? This is an important issue. Take cotton spinning with better equipment management or new equipment as an example. The premise is that the supply is guaranteed: the number of teeth of the reducer umbrella gear is 35T, the number of teeth of the passive umbrella gear: 50T, the number of teeth of the screw sprocket: 23T, the descending stroke of the beater should be controlled at: mm. Control the distance between the beater blade and the rib within the range, and at this distance, the average weight of the cotton block is below. If it is two discs, they are opened at the same time, which is more conducive to opening and mixing.

   It is necessary to ensure that the front suction volume is large, the air duct is unobstructed, no flowers are hung, there is no pause in front of the glass window, no flying flowers, and the photoelectricity must be sensitive. During the operation of the trolley, try not to damage the level of the cotton bale, improve the operation rate, and ensure that the thugs grab The grades and densities of the cotton are the same, and it is not allowed to throw the rewinding and rewinding into the normal operation garden at will. Plus other... This ensures that the operation rate is above 96%.